HIGH POLYMER MODIFIED THIN SET GLASS MOSAIC ADHESIVE FOR AND EXTERIOR
High Polymer modified thin-set adhesive for specially designed for Glass Mosaic Tile for most Of the Wet Areas in Interior and Exterior
Features / Advantages
-
Single component, just add water
-
Exterior / Interior wall and Floor applications,Specially Chosen High Polymer modified Polymer
-
Economical & Easy to use
-
Bonds to various substrates
-
Exceeds ANSI Al 18.1 shear bond strength requirements
-
Class 2 types adhesive
-
Exceeds IS 15477 - Type 2 Adhesive standard
-
Shock Resistance
-
High Flexible properties
Substrates
-
Concrete
-
Concrete Masonry
-
Cement Mortar Beds
-
Cement Plaster
-
Mivon Structure
-
Tile on tile application
-
Brick Masonry
-
Cement Terrazzo
-
Cement Terrazzo
-
Gypsum wall board
-
Cement backer board
* Surface to be cleaned and roughened before instalation of tiles or stones.
| Flexe GTA 40 Mixed with Water | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Open Time |
30 mins |
||||||||||
|
Plot Life |
4 hours |
||||||||||
|
Time to Foot Traffic |
24 hours |
||||||||||
Specification subject to change without notification. Results shown are typical but reflect test procedures used, Actual field performance will depend on installation methods and site condition.
Mixing
Mixing take clean potable water add FLEXE GTA 40 Adhesive powder into the bowel. Mix properly using pedal mixer til workable consistency. Use water / FFLEXE SBR Latex approximately 5.5 – 61 for 20kg powder.
Packaging
20 kg bag
Color
Grey & White
Coverage
Approx 55-60 sft per 20kg bag (6mm x 6mm)
For large format Stones adhesive thickness should be Tinimum 6mm required. For exact thickness and coverage Nease consult Flexe technical Advise.
Related Products
FLEXE CTA10
Adhesive for Ceramic Tiles
FLEXE VTA20
Adhesive for Vitrified Tiles
FLEXE MPA30
Multipurpose Adhesive
