SUPERIOR GRADE INTERIOR WALL a FLOOR THINSET TILE ADHESIVE
Graded Polymer based thin-set adhesive specially designed for fixing ceramic tiles, Vitrified tiles, Gun Tiles, Tile Over tile installation and small format stone on interior floor & wall
Features / Advantages
-
Single component, just add water
-
Interior wall and Floor applications, Graded Polymer
-
Economical & Easy to use
-
Bonds to various substrates
-
Exceeds ANSI Al 18.1 shear bond strength requirements
-
Class 1 types adhesive
-
Exceeds IS 15477 - Type 2 Adhesive standard
-
Can be use external faqade with FLEXE Latex 90
Substrates
-
Concrete
-
Concrete Masonry
-
Cement Mortar Beds
-
Cement Plaster
-
Mivon Structure
-
Tile on tile application
-
Brick Masonry
-
Cement Terrazzo
* Surface to be cleaned and roughened before instalation of tiles or stones.
| Flexe VTA 20 Mixed with Water | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Open Time |
20 mins |
||||||||||
|
Plot Life |
4 hours |
||||||||||
|
Time to Foot Traffic |
24 hours |
||||||||||
Specification subject to change without notification. Results shown are typical but reflect test procedures used, Actual field performance will depend on installation methods and site condition.
Mixing
Take clean potable water add FLEXE VTA 20 Adhesive powder into the bowel. Mix properly using pedal mixer till workable consistency. Use water / FLEXE SBR LATEX approximately 5.5 – 6L for 20kg powder.
Packaging
20 kg bag
Color
Grey & White
Coverage
Approx 55-60 sft per 20kg bag (6mm x 6mm) For large format stones adhesive thickness should be minimum 6mm required. For exact thickness and coverage please consult Flexecrete technical advise.Coverage wil vary depending on trowel notch size, type and size of tille and substrate smoothness and evenness.
Related Products
FLEXE CTA10
Adhesive for Ceramic Tiles
FLEXE MPA30
Multipurpose Adhesive
FLEXE GTA40
Marble Adhesive
