CEMENTITIOUS CROUT ADMIXTURE FOR TILE GROUTS
Flexe Grout admix is a unique design to react with FLEXE CG Cementitious Grout to enhance superior workability and wonderful durable to the tile joints, it produce excellent water absorption properties to increase life of the tight joints in tile spacers. Also specially selected and proven polymers are used in this FLEXE Grout Admixture and made as a champion product to protect with tile joints deceases.
-
Reducing Bacteria free tile joints in a designed period.
-
User friendly, easy to clean with pure water
-
Excellent Crack bearing ability and powdering
-
Carefully Selected Proven Portland cement in pack
-
Colors will not fade in designed period
-
Water and frost resistant
-
Less water absorption will increase grout life
-
Ideal for Interior and exterior.
-
Suitable for Varied tile and stone (Ceramic, vertified, marbles, Granites and glass mosaic).
-
Economical in use
-
All kind of Dry and wet Areas.
-
Flexe CG and Flexe Grout Admixture Not Recommends using Raw Acids will affect Grout strength & Colour.
-
Improve adhesion of grouts to tile and stone joints, results into more durable grout.
-
Flexe Grout Admix along with Flexe Grout cementitious grout can be used in tile joints width between 1 to 5 mm.
Specifications subject to change without notification. Result shown are typical but reflect test procedures used actual field performance will depend on installation methods and site condition
Mixing
Use FLEXE GD GROUT ADMIX 400ML PER IKG FLEXE
CG Gradually add FLEXE in to water / Flexe Grout Admix for optimum result
Packaging
400 ml, 5 Ltr & 20 Ltr
Color
Milky White
Limitations
-
Do not use for tile with grout joint larger than 6mm.
-
Do not use where chemical resistance is required.
-
Do not use acied to clean joints.
Shelf Life
Factory Sealed containers of this product are guaranteed for 2 years if stored dry area
ISO DATA
| Test Method | Requirement | Result |
|---|---|---|
|
Flexural Strenght: ISO 13007-4
Clause 4.1.3
|
2.5 N/mm |
< 5.8 Mpa |
|
Abrassion Resistance: ISO 13007-4 Clause 4.4 |
2000 mm
|
1450 mm |
|
Flexural Strenght under freeze and thaw cycles : ISO 13007-4 Clause 4.1.4 |
2.5 N/mm |
< 5.5 Mpa |
|
Water Absorption after 30 Minutes
& 4 hrs ISO 13007-4
Clause 4.2
|
< 5.0 g < 10g |
2.25 g 5.2 g |
|
Compressive Strength Under freeze & Thaw cycle : ISO 13007-4 Clause 4.1.5 |
> 15 N / mm |
23 Mpa |
Related Products
FLEXE VTA20
Adhesive for Vitrified Tiles
FLEXE MPA30
Multipurpose Adhesive
FLEXE GTA40
Marble Adhesive
