HIGH POLYMER MODIFIED EXTERIOR THINSET ADHESIVE
High Polymer modified thin-set adhesive specially designed for Exterior installation of Marble, Granite, Vitrified tiles, Gun Tiles, and small and large format stones.
Features / Advantages
-
Single component, just add water
-
Exterior / Interior wall and Floor applications, Specially Chosen High Polymer modifed Polymer
-
Economical & Easy to use
-
Bonds to various substrates
-
Exceeds ANSI A118.4 shear bond strength requirements Class 2types adhesive.
-
Exceeds IS 15477 – Type 2 Adhesive standard
-
Shock Resistance
-
High Flexible properties
Substrates
-
Concrete
-
Concrete Masonry
-
Cement Mortar Beds
-
Cement Plaster
-
Mivon Structure
-
Tile on tile application
-
Brick Masonry
-
Cement Terrazzo
-
Gypsum wall board
-
Cement backer board
-
Calcium silicate board
* Surface to be cleaned and roughened before
installation of tiles or stones
| Flexe MPA 30 Mixed with Water | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Open Time |
35 mins |
||||||||||
|
Plot Life |
4 hours |
||||||||||
|
Time to Foot Traffic |
24 hours |
||||||||||
Specification subject to change without notification. Results shown are typical but reflect test procedures used, Actual field performance will depend on installation methods and site condition.
Mixing
Packaging
20 kg bag
Color
Grey & White
Coverage
Approx 55-60 sft per 20kg bag (6mm x 6mm)
For large format stones adhesive thickness should be minimum 6mm required. For exact thickness and coverage please consult Flexecrete technical advise.
Coverage wil vary depending on trowel notch size, type and size of tille and substrate smoothness and evenness.
Related Products
FLEXE CTA10
Adhesive for Ceramic Tiles
FLEXE VTA20
Adhesive for Vitrified Tiles
FLEXE GTA40
Marble Adhesive
