PREMIUM GRADE INTERIOR FLOOR a WALL THIN SET TILE ADHESIVE
Premium grade polymer based interior floor & wall thin set tile adhesive for ceramic tiles, vitrified tiles and small format stones on interior floors and walls
Features / Advantages
-
Excellent adhesion
-
Super fine for a smooth finish
-
Single component iust add water
-
Bonds to various substrates
-
Easy Mixing
-
Exceeds ANSI A 1 18.1
-
Exceeds IS 15477 Class-I Adhesive standards
-
Can be use external facade with Flexe latex 90.
Substrates
-
Concrete
-
Concrete Masonry
-
Cement Mortar Beds
-
Cement Plaster
-
Tile on Tile Application
-
Brick Masonry
-
Cement Terrazzo
-
Existing Natural Stone
* Surface to be cleaned and roughened before installation of tiles or stones.
| Flexe CTA 10 Mixed with Water | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Open Time |
20 mins |
||||||||||
|
Plot Life |
4 hours |
||||||||||
|
Time to Foot Traffic |
24 hours |
||||||||||
Specifications subiect to change without notification.
Results shown are typical but reflect test procedures used. Actual field performance Will depend on installation methods and site condition.
Mixing
Take clean potable water add FLEXE CTA10 Adhesive powder into the bowel. Mix properly using pedal mixer till workable consistency. Use water / FLEXE SBR LATEX approximately 5.5 6L for 20kg powder.
Packaging
20 kg Bag
Color
Grey
Coverage
Approx 55-60 sft per 20kg bag (6mm x 6mm) Coverage will vary depending on trowel notch size, type and size of tile and substrate smoothness and evenness.
Related Products
FLEXE VTA20
Adhesive for Vitrified Tiles
FLEXE MPA30
Multipurpose Adhesive
FLEXE GTA40
Marble Adhesive
