FLEXE EPG-Stain free epoxy grout recommended for all wet areas and where Hygine is most priority such as Swimming pool, Kitchens, Bathroom, Hospitals, Laboratories, Commercial shops, Mall, Sump, Watertanks, Restroom, Schools, Cafeterias, Covered Terrace etc.
Coverage
-
Based on the width, Depth of the Joint and Size of the varies type of tile and stone's.
-
Note: It is always good when calculating coverage to allow 10% extra for wastage and Spillage
Mixing Ratio
-
Part- A
( Resin : 2 Part )
-
Part- B
( Harderner : 1 Part )
-
Part - C
( Filler Powder: 8 Part )
Filler Powder ratio will be vary based on the workable consistancy.
Flexecrete EPG Epoxy Tile grouts has good stain, chemical resistance with good mechanical properties and can be installed as per architecture requirement. For detailed installation and laying procedure Please contact Flexecrete Technical person Flexecrete products supplied shall be as Manufactured by Flexecrete India Private limited.
Packaging
5 kg & 1 kg
Color
Shelf Life
For hardner & resin factory sealed containers of this product are guaranteed for one 1 year if stored dry area.
For filler powder 24 months from date of packing
Mixing
Resin 2 part hardner 1 part & filler powder 8 parts Note: filler piwder ratio will differ based on the workable consistency on wall & floor.
Performance Properties F-EPG :
Applicable Standards:
ANSI A118:3; ISO 13007 – 3 (RG) / EN 13888
ANSI Data
| Property / Test Method | Requirement | Typical Values |
|---|---|---|
|
Water cleanability: ANSI A118.3: Clause 5.1 |
>80 Minutes |
80-100 Minutes |
|
Initial Setting Time: ANSI A118.3: Clause 5.2 |
>120 Minutes |
190 250 Minutes |
|
Setting Time: ANSI A118.3: Clause 5.2 |
≤ 7 Days |
48 Hours 72 Hours |
|
Compressive Strength after 7 days: ANSI A118.3: Clause 5.6 |
>3500 psi (24.06 Mpa) |
7290Psi (49.95 Mpa) |
|
Tensile Strength after 7 days: ANSI A118.3: Clause 5.7 |
>1000 psi (6.87 Mpa) |
1700Psi (11.65 Mpa) |
