FLEXE CG is a polymer based cementitious grout. Carefully selected blended of Portland cement, specially chosen chemical additives, and rich color fillers. Designed for use with WATER or FLEXE GROUT ADMIX to create wonderful art in tile joints.
Features / Advantages
-
Excellent adhesion
-
Super fine for a smooth finish
-
Single component just add water
-
Bonds to various substrates
-
Easy Mixing
-
Exceeds ANSI A 1 18.1
-
Exceeds IS 15477 Class-I Adhesive standards
Applications
Designed for Imm to 5mm joint width for interior and exterior. Optimum result use FLEXE GROUT ADMIX
Ensure before tile grout at least 24 hours required after installation of tile and stone Some of the highly porous and absorption properties stones and tiles should be treated with sealers and let it to be dry for 24 hours to start tile grout.
Packaging
1 kg Packet (1 kg x 10) Carton & 10 kg Bag
Color
Shelf Life
Factory Sealed Containers of this product are guaranteed for one year if stored dry area.
Mixing
Use FLEXE GROUT ADMIX/Water 370 ml to 400ml per 1 kg FLEXE CG. Gradually add FLEXE CG in to water/ FLEXE GROUT ADMIX for optimum result.
Properties
-
Density
1.10 gm/cc
-
Setting time Initial
60-120 min
-
Final
24 Hours
-
Compressive strength
20 MPa @28 days
-
Linear Shrinkage
<0.1%
-
Tensile strength
2.5 MPa
-
Flexural strength
5. MPa
Limitations
-
Do not use for tile with grout joint larger than 5 mm
-
Do not use where chemical resistance is required.
-
Do not use acid to clean joints.
Working Properties at 210C
FLEXE CG Unsanded Grout mixed with FLEXE Grout admix
-
Plot Life
1 Hour
-
Specifications Subject to change without notification
-
Results shown are typical but reflect test procedures used.
-
Actual field performance will depend on installation.
-
Methods and site conditions
