Multipurpose Bonding & Repairing Agent for Mortar and screed

Features / Advantages

• Improved tensile and flexural properties

• Excellent bond to concrete, masonry,

• Excellent bonds to Old and New concrete

• Excellent resistant to freeze/thaw

• Single product multipurpose uses for concrete cement mortars

• Ideal solution for concrete and mortar repair and patch works

• Ideal for making floor screeds in internal and external

• Increase excellent workability and good durable surfaces

• User friendly

SLURRY BOND COAT/WATERPROOFING SLURRY / FOR MORTAR AND SCREEDS

• Mix 1.5 volume of cement to FLEXE SBR PLUS by weight of cement.

• Mix to a lump-free creamy, consistency for 2-3 minutes by slowly adding of FLEXE SBR PLUS

• As water proofing slurry: Mix 2 parts cement to 1 part FLEXE SBR PLUS by weight of cement.

• For Repair Mortar: 1 Litre of FLEXE SBR PLUS and 5kg of Cement:15 kg of sieved sand and 1 litres of water.

• Using a stiff brush, work the bonding slurry well into the damp surface. When the bond coat is tacky apply mortar/screed overlay

• For Floor Topping/Screed. 1 Litre of FLEXE SBR PLUS 5Kg of Cement: 7.5Kg of sand and 7.5 kg of coarse aggregate small size less than 6mm and 1 litres of water.

Mixing Process Mortar/Screed:

• Use lump free cement, well gradedsand/aggregates free of excessive fines. Mix sand and cement and coarse aggregate into mixer for 1-2minutes. Hand mixing is only permissiblewhen the total weight of the mix is lessthan 23kg.

• Mix required quantity of Flexe SBR Plus and water for 2 minutes in a separate container, to avoid excessive air entrapment. Finally, without delay, add the liquid mix slowly into the mixer containing the mixed powdered sand/coarse aggregate and cement until the required consistency is achieved.

Vertical surfaces:

• Apply the bonding slurry to the preparedsurface and then apply the FLEXE SBR Latex render onto the wet bonding slurry. Application Thickness: 5 to 25mm.

• Screeds and toppings, applied to horizontal surfaces: Application thickness 10mm to 40mm. The FLEXE SBR Plus modified mix should be placed over the still wet bonding slurry, well compacted by hand and trawled to finish using a wooden float or steel trowel.

Packaging

1 Litre

5 Litre

20 Litre

Related Products

FLEXE SBR Latex

A versatile liquid suitable for multiple construction applications.